Setting Depth Display - JRC JFE-380 Instruction Manual

DAY1 / DAY2 / NIGHT1 / NIGHT2
Make SCREEN or CHARACTER a yellow display, press
displayed.
Select a color tone of the favor number with
content of characters is shown in the following.
SCREEN (image color)
1 : Background color: Black Sea bottom color: B/W 8 steps
2 : Background color: Blue Sea bottom color: Red 8 steps
3 : Background color: Black Sea bottom color: Red 8 steps
4 : Background color: White Sea bottom color: Red 8 steps
5 : Background color: Blue Sea bottom color: Red Brown 8 steps
6 : Background color: Black Sea bottom color: Amber 8 steps

Setting Depth Display

The standard when the depth value is displayed is selected.
Make DEPTH DISPLAY MODE a yellow display, press
following, set content.
Set content
SURF
TRAN
KEEL
Select the standard by
4. Operation 26
SURF/TRAN/KEEL
The record and the depth value in which the draft adjusted value is considered are
displayed.
The record and the depth value right under oscillator element are displayed.
The record and the depth value in which the keel correction value is considered are
displayed.
and press the [ENT] key.
or the [ENT] key, and the number of 1 6 is
or key and press the [ENT] key because each
CHARACTER (character color)
1 : White
2 : Green
3 : Yellow
4 : Gray
5 : Navy blue
6 : Amber
or the [ENT] key, and select it from the