Initial Setting; Setting Memory Length; Setting Display Color Of Day/Night - JRC JFE-380 Instruction Manual

4.5 Initial Setting

The following menu is displayed with [MENU] INITIAL
INITIAL
MEMORY LENGTH
COLOR
DEPTH DISPLAY MODE
PRIMARY
SECONDARY
DATE/TIME
A present selection item is displayed by a yellow character.
Selecting items move a yellow display with
When or the [ENT] key is pressed after a necessary item is selected, the item setting content is
displayed.
When the [ENT] key is pressed after the content is selected (setting), the selection (setting) is registered
and it returns to above screen.
When returning to above screen without registering, press

Setting Memory length

The memory length of the sounding data displayed in the history mode is set.
Make MEMORY LENGTH a yellow display, press
set content.
Set content
12hr
24hr
Select the length by

Setting Display Color of Day/Night

When switching with the [DAY/NIGHT] key, the image color and the character color are set.
Make COLOR a yellow display, press
COLOR
DAY1
DAY2
NIGHT1
NIGHT2
24hr
TRAN
12hr/24hr
The memorizing length is set to 12 hours. (Memorizing interval is 30 seconds.)
The memorizing length is set to 24 hours. (Memorizing interval is 1 minute.)
and press the [ENT] key.
After the item is selected with
when key is pressed, a right menu is
displayed.
As for a set menu of DAY1 NIGHT2, the
same content is displayed.
.
A left, set content is an initial value.
or key.
or the [CLR] key.
or the [ENT] key, and select it from the following,
or the [ENT] key, and the menu under the left is displayed.
or key, DAY1
SCREEN 2
CHARACTER 1
4. Operation 25