Setting System Alarm - JRC JFE-380 Instruction Manual

Setting System Alarm

Make SYSTEM ALARM a yellow display, press
displayed.
SYSTEM ALARM
DEPTH LOST
TX ALARM
RX ALARM
BUBBLE ALARM
PRINTER ALARM
DEPTH LOST
The alarm operation when sea bottom cannot be detected is selected.
Make DEPTH LOST a yellow display, press
content.
Set content
OFF
ON
Select the operation by
TX ALARM
When the transmitter becomes abnormal, the alarm operation is selected.
Make TX ALARM a yellow display, press
content.
Set content
OFF
ON
Select the operation by
4. Operation 22
OFF
Selecting items move a yellow display with
OFF
OFF
OFF
ON
OFF/ON
The sea bottom lost alarm doesn't operate.
When sea bottom was not able to be detected 15 times or more, the sea bottom lost
alarm is started.
When sea bottom was not able to be detected 40 times or more with range of
10/20/50m, the sea bottom lost alarm is started.
When sea bottom is detected after the sea bottom lost alarm starts, it is released.
and press the [ENT] key.
OFF/ON
The transmission alarm doesn't operate.
When abnormality occurs in the transmitter, the transmitter alarm is started.
and press the [ENT] key.
or the [ENT] key, and the following menu is
or the [ENT] key, and select it from the following, set
or the [ENT] key, and select it from the following, set
or key.