Display Cleaning - JRC Alphatron AlphaPilot MFS Operation Manual

5.1.2 Display cleaning

The purpose of the Clean Mode feature is to clean the surface of the touch screen without
accidentally activating a function. When the Clean mode is started, the touch screen will be
deactivated for 60 seconds. Within this period the instrument will remain functional, but it is not
operable. Except when an indication is activated, then the touch screen will be activated
immediately, and the instrument will be operable again.
To start Clean Mode, perform the following procedure:
1. Press the CONFIRM CLEANING THE SCREEN button to start the Clean Mode.
2. The AlphaPilot MFS Control Unit starts the countdown sequence. The touch screen is now
deactivated, and the surface can be cleaned. After 60 seconds, or at an active alert, the
instrument will become operable again.
For safety reason, if an alert is active and needs attention of the operator, Clean
NOTICE
Mode can not be started.
33 | Menus
Figure 7: Menu item 'Display cleaning'