Executing Line Monitor; Displaying Rx Monitor; Displaying System No - JRC JFE-380 Instruction Manual

Executing Line Monitor

Make LINE MONITOR a yellow display, press
LINE MONITOR
NAV/DEPTH
ALR
PRINTER
Make the monitor item a yellow display, press
port is displayed, and input data is displayed in the upper part of the screen, and output data is displayed
under the screen.
When the [CLR] key is pressed, it returns to the maintenance menu.

Displaying RX Monitor

Make RX MONITOR a yellow display, press
displayed.
LEVEL Detection level of sea bottom (maximum value within the range from sea bottom detection
position to the lower side)
RANGE Range of sea bottom tracking
GAIN Gain setting value
When the [CLR] key is pressed, it returns to the maintenance menu.

Displaying System No.

Make SYSTEM No. a yellow display, press
Ver.
When the [CLR] key is pressed, it returns to the maintenance menu.
or the [ENT] key, and the following menu is displayed.
NAV/DEPTH
ALR
PRINTER
or the [ENT] key, and the input/output data of the serial
or the [ENT] key, and a present situation of the receiver is
or the [ENT] key, and the program version is displayed.
Date
Version
Navigation data/Depth output
ALR Input/Output
Printer port
6. Maintenance & Check 49