Setting Cursor Display - JRC JFE-380 Instruction Manual

Setting Cursor Display

The cursor display method in a standard mode and a history mode is selected.
Make CURSOR a yellow display, press
Set content OFF/ON/AUTO
OFF When the cursor key is operated, it makes an error of the cursor without displaying it.
ON Whenever the cursor key is operated, the cursor is displayed.
AUTO When the cursor key is operated, the cursor is displayed for 30 seconds. It doesn't
display afterwards. When the cursor key is pressed again, it is displayed at the
position.
Select the method by
or the [ENT] key, and select it from the following, set content.
and press the [ENT] key.
4. Operation 19