Setting Depth Display; Screen; Character - JRC JFE-680 Instruction Manual

｢DAY1｣/｢DAY2｣/｢NIGHT1｣/｢NIGHT2｣
・ Make SCREEN or CHARACTER a yellow display, press
displayed.
・Select a color tone of the favor number with
content of characters is shown in the following.
SCREEN (image color)
1 : Background color: Black・Sea bottom color: B/W 8 steps
2 : Background color: Blue・Sea bottom color: Red 8 steps
3 : Background color: Black・Sea bottom color: Red 8 steps
4 : Background color: White・Sea bottom color: Red 8 steps
5 : Background color: Blue・Sea bottom color: Red Brown 8 steps
6 : Background color: Black・Sea bottom color: Amber 8 steps

Setting Depth Display

◎The standard when the depth value is displayed is selected.
・Make DEPTH DISPLAY MODE a yellow display, press
following, set content.
Set content ：SURF/TRAN/KEEL
SURF
TRAN
KEEL
・Select the standard by
4. Operation 28
：The record and the depth value in which the draft adjusted value is considered are
displayed.
：The record and the depth value right under oscillator element are displayed.
：The record and the depth value in which the keel correction value is considered are
displayed.
and press the [ENT] key.
or the [ENT] key, and the number of 1～6 is
or key and press the [ENT] key because each
CHARACTER (character color)
1 : White
2 : Green
3 : Yellow
4 : Gray
5 : Navy blue
6 : Amber
or the [ENT] key, and select it from the