Communication Setting; Setting Depth Output; Setting Alarm Output - JRC JFE-380 Instruction Manual

4.7 Communication Setting

The following menu is displayed with [MENU] COMMUNICATION
COMMUNICATION
DEPTH
ALARM
SYSTEM
PRINTER PORT OUT
A present selection item is displayed by a yellow character.
Selecting items move a yellow display with
When or the [ENT] key is pressed after a necessary item is selected, the item setting content is
displayed.
When the [ENT] key is pressed after the content is selected (setting), the selection (setting) is registered
and it returns to above screen.
When returning to above screen without registering, press

Setting Depth Output

Make DEPTH a yellow display, press
Set content
Ver1.5
Ver2.3
ALL
PJRCU" is output as for each setting of "Ver1.5/Ver2.3/ALL".
Select the content by

Setting Alarm Output

Make ALARM a yellow display, press
Set content
OFF
ON
Select the content by
4. Operation 34
ALL
ON
ON
PRINTER
or the [ENT] key, and select it from the following, set content.
Ver1.5/Ver2.3/ALL
Setting of DEPTH DISPLAY MODE in "INITIAL" of the menu;
Only SDDBS" is output for
Only SDDBT" is output for
Only SDDBK" is output for
SDDPT" is output.
Both content of "Ver1.5" and "Ver2.3" are output at the same time.
and press the [ENT] key.
or the [ENT] key, and select it from the following, set content.
OFF/ON
When warning starts, the ALR sentence is not output. (Data as the history remains.)
SDALR" is output for all items of alarm setting "ON" in the alarm setting menu by a
period for one second.
and press the [ENT] key.
.
A left, set content is an initial value.
or key.
or the [CLR] key.
SURF .
TRAN .
KEEL .