Installing Ddr3 Dimms - Oracle Sun Blade X6275 Service Manual

FIGURE 3-4
3.1.4

Installing DDR3 DIMMs

Always replace a DDR3 DIMM with the same Sun part number as the failed DDR3
DIMM.
Tip – See
configuring the DDR3 DIMMs.
1. Unpack the replacement DDR3 DIMMs and place them on an antistatic mat.
2. Ensure that the ejector tabs are in the open position.
3. Line up the replacement DDR3 DIMM with the connector. See
Align the DDR3 DIMM notch with the key in the connector. This ensures that the
DDR3 DIMM is oriented correctly.
4. Push the DDR3 DIMM into the connector until the ejector tabs lock the DDR3
DIMM in place.
Removing a DIMM
Section 3.1.2, "DDR3 DIMM Guidelines" on page 3-5
Chapter 3 Servicing Server Module Components
for information about
.
FIGURE 3-5
3-9