A
A P P E N D I X
BIOS Screens
A.1
Configuring BIOS Settings
This appendix describes how to view and or modify the BIOS Setup utility screens in
the
Sun Blade X6275 server module
The following topics are covered in this appendix:
Section A.1, "Configuring BIOS Settings" on page A-1
■
Section A.2, "BIOS Setup Menu Screens" on page A-5
■
A.1.1
About BIOS
The BIOS Setup utility reports system information and can be used to configure the
server BIOS settings. The Basic Input/Output System (BIOS) has a Setup utility
stored in the BIOS flash memory.
The configured data is provided with context-sensitive help and is stored in the
system's battery-backed CMOS RAM. If the configuration stored in the CMOS RAM
is invalid, the BIOS settings default to the original state specified at the factory.
You can access BIOS configuration screens from the following interfaces:
Use a USB keyboard, mouse, and VGA monitor connected directly to the server.
■
Use an RKVM (or terminal emulator connected to a computer) through the serial
■
port on the rear panel of the server.
.
A-1