Removing The Server Module Top Cover; Section 2.7, "Removing The Server Module Top Cover - Oracle Sun Blade X6275 Service Manual

2.7

Removing the Server Module Top Cover

1. Power down both server module compute nodes.
See
2. Remove the server module from the chassis. Place it on a flat surface.
See
3. Attach an antistatic wrist strap.
See
page
4. Press down on the server module cover release button and, using the indent for
leverage, slide the main cover toward the rear of the server module chassis
approximately 0.5 inch (12 mm). See
5. Grasp the server module cover by its rear edge and lift it straight up from the
server module chassis.
Removing the Server Module Top Cover
FIGURE 2-5
"Powering Off the Server Module" on page
"Removing the Server Module From the Sun Blade Chassis" on page
"Performing Electrostatic Discharge and Antistatic Prevention Measures" on
2-9.
2-4.
.
FIGURE 2-5
Chapter 2 Preparing to Service the System
2-7.
2-11