CYBEX SOLUTION M-FIX User Manual page 72

REMOVING THE SEAT COVER REMOVING THE SEAT COVER
The cover of the infant seat consists of four parts (Headrest flap, headrest, The cover of the infant seat consists of four parts (Headrest flap, headrest,
shoulder part cover, booster cover and/or seat surface cover).This is shoulder part cover, booster cover and/or seat surface cover).This is
.complemented by the safety cushion cover .complemented by the safety cushion cover
The four covers of the seat are fitted into the cover attachment channels on the The four covers of the seat are fitted into the cover attachment channels on the
edge of the infant seat and are held in position at several places by press-studs edge of the infant seat and are held in position at several places by press-studs
.((see image .((see image
Once all studs have been released, the single parts of the cover can be removed Once all studs have been released, the single parts of the cover can be removed
.from the cover attachment channels .from the cover attachment channels
In order to put the covers back on the seat, proceed in the reversed order as In order to put the covers back on the seat, proceed in the reversed order as
.removing them .removing them
.Warning! The child car seat must never be used without the cover .Warning! The child car seat must never be used without the cover
REMOVING THE COVER FROM THE HEADREST FLAP REMOVING THE COVER FROM THE HEADREST FLAP
Pull the opening of the cover over the adjustment lever so that the cover does not Pull the opening of the cover over the adjustment lever so that the cover does not
.get jammed on the lever when pulling it up to remove it .get jammed on the lever when pulling it up to remove it
REMOVING THE COVER FROM THE HEAD SUPPORT REMOVING THE COVER FROM THE HEAD SUPPORT
Release the two press-studs at each side of the rear of the shoulder area. Pull Release the two press-studs at each side of the rear of the shoulder area. Pull
.the cover out of the cover attachment channel .the cover out of the cover attachment channel
REMOVING THE COVER FROM THE SHOULDER PART REMOVING THE COVER FROM THE SHOULDER PART
.Pull the cover out of the cover attachment channel .Pull the cover out of the cover attachment channel
71