В Соответствии С Правилом Ece R16 Или Со Placing The Seat In The Vehicle; Fastening Your Child's Seatbelt - CYBEX SOLUTION M-FIX User Manual

a
v
k
m
CLICK!
16
l
PLACING THE SEAT IN THE VEHICLE
Place the child car seat on the appropriate seat in the car.
• Always ensure that the entire surface of the backrest (a) of the CYBEX
SOLUTION M-FIX is placed fully against the backrest of the vehicle seat.
The child car seat must never be in a lying position. If necessary, you can
adjust the distance using the adjustment lever (v).
• If the headrest of the vehicle is in the way, pull it out all the way, turn it away
or remove it completely (for exceptions to this, please refer to the section
"POSITIONING THE SEAT CORRECTLY IN THE VEHICLE") The backrest (a) will
perfectly adapt to practically any recline of the vehicle seat.
WARNING! The full surface of the backrest of the CYBEX child car seat must
be against the backrest of the vehicle. To ensure maximum protection for your
child, the seat must be in a normal upright position!
Note! On some car seats made of sensitive materials (e.g. suede, leather etc.), the
use of child car seats may leave marks and/or cause discolouration. To prevent this,
you can place a blanket or towel underneath it, for example. Please also refer in
this connection to our cleaning advises in these usage instructions; these cleaning
instructions must be observed prior to using the seat for the fi rst time.

FASTENING YOUR CHILD'S SEATBELT

1. Place your child in the child car seat. Pull the three-point belt right out and feed it
along the belt buckle (l) in front of your child.
WARNING! Never twist the belt.
2. Insert the belt tongue (m) into the belt buckle (l). It must lock into place with an
audible "CLICK".
3. Next, place the lap belt (n) in the lower belt guides (k) of the child car seat.
4. Now pull the diagonal belt (f) firmly to tighten the lap belt (n). The tighter the belt
sits, the better it provides protection from injury. On the side of the belt buckle (l),
the diagonal belt (f) and the lap belt (n) must be inserted together in the lower belt
guide (k).