CYBEX SOLUTION M-FIX User Manual page 64

The "Linear Side-impact Protection" system (L.S.P.) can be extended in two steps
by pressing the L.S.P. button(s).Together with the initial position, this provides a
.Note! Always activate the L.S.P. on the side of the seat facing the car door
To push the L.S.P. back into the housing, press the L.S.P. button again and push
The seat can then be adjusted to your child's body simply by using the
adjustable headrest (e). To do this, pull the adjustment level (h) upwards to
Adjust it so that there is space for two fingers between the lower edge of the
Note! Only an optimally adjusted headrest (e) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be fitted
smoothly (f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one
REMOVAL OF THE CYBEX SOLUTION M-FIX
.Perform the installation steps in the reverse order
Unlock the ISOFIX locking arms (o) on both sides by pushing the red
.release buttons (y) and pulling them back simultaneously
.(Pull the seat out of the ISOFIX guides (u
Operate the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX and push the locking arms in as far as they will go
Note! By folding in the locking arms (o), you are not just protecting the vehicle
seat but also the locking arms of the ISOFIX Connect system from dirt and
.ACTIVATING THE L.S.P
.total of three different L.S.P. settings
.the L.S.P. back into the starting position
ADAPTING TO BODY SIZE
.(unlock the headrest (e
.headrest (e) and the shoulder of the child
.of twelve positions
.Rotate the locking arms (o) 180°
The "Linear Side-impact Protection" system (L.S.P.) can be extended in two steps
by pressing the L.S.P. button(s).Together with the initial position, this provides a
.Note! Always activate the L.S.P. on the side of the seat facing the car door
To push the L.S.P. back into the housing, press the L.S.P. button again and push
• The seat can then be adjusted to your child's body simply by using the
adjustable headrest (e). To do this, pull the adjustment level (h) upwards to
• Adjust it so that there is space for two fingers between the lower edge of the
Note! Only an optimally adjusted headrest (e) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be fitted
smoothly (f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one
• Unlock the ISOFIX locking arms (o) on both sides by pushing the red
.release buttons (y) and pulling them back simultaneously
•
•
• Operate the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX and push the locking arms in as far as they will go
Note! By folding in the locking arms (o), you are not just protecting the vehicle
seat but also the locking arms of the ISOFIX Connect system from dirt and
.damage
.ACTIVATING THE L.S.P
.total of three different L.S.P. settings
.the L.S.P. back into the starting position
ADAPTING TO BODY SIZE
.(unlock the headrest (e
.headrest (e) and the shoulder of the child
REMOVAL OF THE CYBEX SOLUTION M-FIX
.Perform the installation steps in the reverse order
.(Pull the seat out of the ISOFIX guides (u
.Rotate the locking arms (o) 180°
•
•
.of twelve positions
•
•
•
•
.damage
63