Incorrect Date And Time; System Will Not Boot; Error Message On Screen - Fujitsu PRIMERGY RX100 S4 Server Operating Manual

Incorrect date and time

Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the
mouse supplied.
Ê Check in the BIOS Setup that the mouse controller is set to Enabled.
7.7 Incorrect date and time
Ê Set the time and/or date in the operating system or in the BIOS Setup.
I
If the time and date are repeatedly wrong when you switch on your
server, you need to change the lithium battery. Contact our customer
service team.
7.8

System will not boot

The system will not boot after installing a new hard disk drive.
Ê Reboot the system with ServerStart disk 1/2 or with a boot CD and recon-
figure the server (see
7.9

Error message on screen

The meaning of the error message is explained in the manual for the BIOS Setup
and in the documentation for the relevant components and programs on the
PRIMERGY ServerBooks DVD.
68
section "Configuring the server" on page
Operating manual
Troubleshooting and tips
57).
RX100 S4