Fujitsu PRIMERGY RX100 S4 Server Operating Manual page 56

Switching the server on and off
Other on/off options
In addition to the On/Off button, the server can be switched on and off in the
following ways:
– Specified switch on time / switch off time
The server is switched on or off at a time specified in the ServerView program.
– Ring indicator
The server is switched on by an internal or external modem.
– Wakeup on LAN (WOL)
The server is switched on by a command from the LAN.
– After power failure
The server is automatically switched on following a power failure (depending
on the BIOS settings).
– Power button override
The server can be switched off immediately by pressing and holding the
On/Off button (approx. 4-5 sec.).
V
CAUTION!
There is a risk that data may be lost.
– IPMI
The server is switched on from an IPMI console (via the COM1 serial
interface or LAN interface 1). The serial interface may need to be enabled in
the BIOS Setup first as it is disabled by default.
56 Operating manual
Starting up and operation
RX100 S4