Rear Of Server - Fujitsu PRIMERGY RX100 S4 Server Operating Manual

Starting up and operation
5.1.2

Rear of server

Indicators on connection panel (global error indicator and ID indicator)
Figure 11: Global error indicator and ID indicator
1 Global error indicator (amber)
Does not light up when the system is OK. No service incident or critical
event has occurred.
Flashes amber when a critical event has occurred. Users can check for
event details in the BIOS Setup, the system and event log or via ServerView.
The indicator also flashes in standby mode.
Lights up amber when a prefailure event has been detected. Users can
check for event details in the system and event log or via ServerView. The
indicator also lights up in standby mode.
If the event is still acute after a power failure, the indicator is activated after
the restart.
2 ID indicator (blue)
The ID indicators on the front and rear of the server light up synchronously
when the ID button is pressed.
Lights up blue when the system has been selected by pressing the ID
button. To deactivate, press the button again.
The indicator can also be activated via ServerView and its status reported to
ServerView.
Table 4: Global error indicator and ID indicator
RX100 S4
1
2
Operating manual
Controls and displays
53