Fujitsu PRIMERGY RX100 S4 Server Operating Manual page 51

Starting up and operation
11 Global error indicator (amber)
Does not light up when the system is OK. No service incident or critical
event has occurred.
?
Flashes amber when a critical event has occurred. Users can check for
event details in the BIOS Setup, the system and event log or via
ServerView. The indicator also flashes in standby mode.
Lights up amber when a prefailure event has been detected. Users can
check for event details in the system and event log or via ServerView.
The indicator also lights up in standby mode.
If the event is still acute after a power failure, the indicator is activated
after the restart.
Table 2: Displays and controls on the front panel
RX100 S4
Operating manual
Controls and displays
51