Installation Steps: Overview - Fujitsu PRIMERGY RX100 S4 Server Operating Manual

2

Installation steps: Overview

This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety infor-
mation in chapter
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see section
Ê Transport the server to the place where you want to install it
Ê Make sure that all necessary manuals (see
tation" on page
Ê Fitting the server in the rack (see section
in/from the rack" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 45
cables" on page
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and displays on the front and rear of
the server (see section
RX100 S4
"Important information" on page
"Unpacking the server" on page
8) are available; print out the PDF files if required.
35).
and "Instructions for connecting/disconnecting
47.
46).
"Controls and displays" on page
Operating manual
19.
"Additional server documen-
"Installing/removing the server
"Connecting devices to
"Connecting the server to the
49).
34).
17