Fujitsu PRIMERGY RX100 S4 Server Operating Manual page 13

Introduction
RemoteView
RemoteView is the remote management solution from Fujitsu Siemens
Computers for Intel-based PRIMERGY systems. RemoteView and the relevant
hardware components integrated on the system board allow remote monitoring
and maintenance as well as fast restoration of operation in the event of errors.
Remote monitoring and maintenance avoids time-consuming and costly on-site
repairs and reduces service costs. This leads to a reduction in the total cost of
ownership and an excellent return on investment for the remote management
solution.
LAN port 1 is used as the management interface and is set up for operation with
RemoteView. The management system shares the LAN connection with the
standard operating system.
The administrator can access all system information and information from the
sensors such as fan speeds, voltages etc. via a Web interface (iRMC Web
interface). He can also start the text-based or graphical console bypass
(Advanced Video Redirection, AVR) and obtain information about remote
storage.
RemoteView helps
switch on/off the system remotely
monitor systems and analyze the cause of faults
prepare error resolution or to have this process initiated independently
where possible
identify potential sources of error
configure the system
adjust system settings and initiate system restarts from a remote location
RX100 S4
Operating manual
Features
13