Fujitsu PRIMERGY RX100 S4 Server Operating Manual page 27

Important information
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers is not responsible for any radio or television inter-
ference caused by unauthorized modifications of this equipment or the substi-
tution or attachment of connecting cables and equipment other than those
specified by Fujitsu Siemens Computers. The correction of interferences
caused by such unauthorized modification, substitution or attachment will be the
responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to
any and all optional peripheral or host devices. Failure to do so may violate FCC
and ICES rules.
WARNING:
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
CN: 符合 FCC A 类标准声明
如果设备上标有 FCC 声明，则：
除非另有说明，以下声明适用于本手册中提及的产品。其它产品的声明将在其
随附文档中列出。
注意：
本设备经过测试，符合 FCC 规则第 15 部分关于 " A 类"数字设备的限制，并
且符合加拿大干扰成因设备标准的所有要求。适用于数字设备的 ICES-003 这
些限制的目的是为了在居住环境中提供合理的保护，从而防止有害干扰。本设
备会产生、使用和辐射射频能量，如果不严格遵照说明安装和使用，可能会对
无线电通信造成有害干扰。但是，即使是特定的安装条件也不能保证绝对不会
产生干扰。如果本设备确实对无线电或电视接收造成有害干扰，并且可以通过
关闭和打开设备来确定存在干扰，用户可以采用以下一种或多种方法予以排除：
重新调整接收天线的方向或位置。
RX100 S4
FCC Class A Compliance Statement
Operating manual 27