Video Screen; Touch Calibration Screen - Extron electronics TouchLink TLP 710MV User Manual

Video Screen

Figure 17.
The small gray rectangle provides a video preview window for adjusting video properties.
Use the Down or Up buttons to adjust:
•
•
•
•

Touch Calibration Screen

After setting the values, press the Menu button a second time to calibrate the touch area
of the Touchpanel.
Figure 18.
Press on the green box until the color reverts to gray with a white border and a second
box is highlighted. Repeat until all four boxes have been pressed and calibrated. At that
point the screen returns to the
Exit the on-screen menus, by pressing the Exit button in the bottom left corner of the
menu screens.
Contrast: 064
Main
Down
Volume
Time
Brightness: 128
Network
Down
Video
Exit
Video Screen
Contrast between 0 and 127 (default, 64)
Color between 0 and 127 (default, 64)
Brightness between 0 and 255 (default, 128)
Tint between 0 and 255 (default, 128)
+
Press and Hold
Highlighted Box
Until Color Changes
+
Touch Calibration Screen
Color: 064
Up Down Up
Tint: 128
Up Down Up
Main screen (see page 14).
TLP 710MV and TLP 710TV • Initial Calibration
+
+
17