Removing the TLP 710TV Base for VESA Mounting
Figure 45.
1.
2.
Figure 46.
Removing the Back and Base Covers
Remove the back cover by inserting the Extron removal tool (provided) into the
notches on each side and prying off the cover.
Remove the base cover using the Extron removal tool.
Removing the Base from the Touchpanel
Notch to Remove
Back Cover
Notch to Remove
Base Cover
VESA mounting hole (4)
Spanner Drive
Security Screws
(2 for each hinge)
Hinges (2)
Cable Runway
TLP 710MV and TLP 710TV • Mounting
45