Using Global Configurator - Extron electronics TouchLink TLP 710MV User Manual

Using Global Configurator

NOTE:
This section provides an overview of the Global Configurator program. For complete
information about the program, see the Global Configurator help file (select Contents
from the Help menu or press the <F1> key while the program is running).
NOTE:
1.
If this project has been uploaded to the TouchLink panel before, the user can upload
only the changes that have been made to the previous version. The project can be
uploaded to certain touchpanels selected from the list found within the Devices
section of the File Upload Manager screen.
To configure the touchpanel, use Global Configurator version 3.3 or later.
This section describes how to set up Global Configurator project with an
IPL 250. While setting up a project with another IP Link product is similar, see
the Global Configurator help file for exact information about the product
being used.
Double-click the GC3 desktop icon. The Global Configurator 3 Start Options box
opens.
Figure 34.
Global Configurator 3 Start Options
TLP 710MV and TLP 710TV • Configuration Software 29