Installing The Coin Changer; Install The Changer Housing Skirt And Levelers - VKI Technologies Eccellenza Express Service Manual

Eccellenza Express – Service Manual

Installing the Coin Changer

The Eccellenza Express uses the "MDB–Level 3" protocol to communicate with a compatible coin
changer. Although several coin changer models are available with this protocol from different
manufacturers, VKI has thoroughly tested and validated ONLY the following coin changer units for
proper operation with the Eccellenza Express:
COIN CHANGERS
Coinco
Coinco
It is highly recommended that you acquire the "Operation & Service" manuals for each of
these items from Coinco
customizable and may require direct configuration through their own respective software,
which is totally independent of the Eccellenza Express software configuration.

Install the changer housing skirt and levelers

1. Remove the coin changer housing from its packaging.
2. Open the coin changer housing door and remove the housing's front skirt and two
levelers, which are stored inside.
3. Install the two levelers onto the bottom of the housing.
4. Install the skirt onto the bottom front of the housing and secure it in place with the
two screws provided.
62
Guardian 6000
® ™
Quantum 700 Series – a partially customizable 4-tube changer
® ™
(www.coinco.com). These sophisticated changers are highly
®
– a fully customizable 6-tube changer
July 15, 2015