VKI Technologies Eccellenza Express Service Manual page 17

4. To re-install the spout support bracket, insert the bottom of the bracket into the
slit on the front of the base.
5. While lifting the brewer, tilt the spout bracket upwards and to the back until it clears
the brewer spout. If done properly, the brewer spout will enter the hole on the spout
support plate and secure it in place.
6. Reconnect the powder and hot water hoses to the spout support, and reconnect the
brewer hose.
July 15, 2015
Eccellenza Express – Service Manual
17