VKI Technologies Eccellenza Express Service Manual page 22

Eccellenza Express – Service Manual
5. The brewer motor and bracket assembly can now be removed from the machine.
6. Remove the four screws securing the brewer motor to its mounting plate.
7. Remove the brewer switch plate assembly from the brewer motor by removing the
three mounting screws. Be careful not to lose the small ground tab and lock
washers – they must be re-installed onto the replacement motor.
8. Install the brewer switch plate onto the replacement motor (three screws), making
certain to re-install the ground tab and lock washers.
9. Install the mounting plate onto the new motor (four screws).
10. Reconnect the wiring to the brewer motor, the home switch and reconnect the
ground terminal.
11. Re-install the brewer bracket assembly onto the machine (install the two upper
screws, and then the two lower screws).
12. Re-install the brewer (remember to reconnect the brewer hose).
22
July 15, 2015