Replacing A Powder Dispenser - VKI Technologies Eccellenza Express Service Manual

Replacing a Powder Dispenser

1. Remove the retaining bracket at the front of the two dispensers by pulling on the
right-hand side of the bracket. The left side of the bracket locks into the wall,
whereas the right side of the bracket clips in place. Once the right side is pulled off,
the left side will be free from the wall.
2. Lift the front of the powder dispenser and pull it forward to remove it.
3. Insert the new dispenser (already filled) onto the dispenser base making certain the
coupling on the dispenser engages with the coupling on the dispenser motor.
July 15, 2015
Eccellenza Express – Service Manual
25