Installing The Brewer - VKI Technologies Eccellenza Express Operating Manual

Eccellenza Express – Operating Manual

Installing the Brewer

1. Make certain that the brewer pin is properly aligned with the brewer motor coupling.
If it's not aligned, use the optional brewer crank tool to adjust the brewer pin.
2. Sit the brewer onto the two lower guides.
3. Push the top of the brewer towards the rear, making certain the brewer pin engages
properly into the brewer motor coupling. Once coupled, press down on the brewer
release latch until the brewer moves into position, and then release the latch to lock
the brewer in place.
76
August 8, 2013