Replacing The Exhaust Fan - VKI Technologies Eccellenza Express Service Manual

Eccellenza Express – Service Manual

Replacing the Exhaust Fan

1. With the machine power switched off, open the rear service panel
2. Remove the exhaust fan cover by prying it off – it is clipped directly onto the fan.
3. Disconnect the power wires to the exhaust fan.
4. Remove the four screws and hex nuts securing the exhaust fan to the service panel.
5. Remove the old fan.
To re-install the rear exhaust fan, follow these same instructions in the reverse
order.
58
.
(see page 14)
July 15, 2015