VKI Technologies Eccellenza Express Service Manual page 57

6. Slide the new ratchet fastener through the holes on the inside of the machine (the
wall at the left of the brewer area).
7. While maintaining pressure on the ratchet fastener on the inner wall of the machine,
slide the fan onto the fastener from the outer wall, and press it onto the fastener
until it is secure. Repeat this procedure for the second ratchet fastener.
8. Connect the wiring to the fan, and connect the vacuum tube to the top of the fan.
9. Re-install the brewer and the machine's left side panel.
July 15, 2015
Eccellenza Express – Service Manual
57