VKI Technologies Eccellenza Express Service Manual page 31

11. Connect the four wires to the upper terminal block.
With the four screws loosened on the terminal block at the top of the power supply,
insert the wiring terminals under their respective screws and tighten the screws to
secure the terminals in place.
12. Install the plastic protector caps onto the two terminal blocks on the power supply.
13. Re-install the machine's right side panel and close the rear service panel.
14. Reconnect the service cord to the wall outlet.
15. Switch the machine power on and test the equipment operation.
July 15, 2015
Red Red Blue White
a. Terminal Screw #1 – Red wire
b. Terminal Screw #2 – Red wire
c. Terminal Screw #3 – Blue wire
d. Terminal Screw #4 – White wire
Eccellenza Express – Service Manual
31