VKI Technologies Eccellenza Express Service Manual page 53

6. While pressing down on the locking clip at the front of the base, press down on
the clip at the rear of the base, and push it out through the front of the wall.
7. Transfer any required components from the old whipper motor to the new
whipper motor.
8. Install the new motor into the cutout in the machine wall. Install the bottom of
the assembly first, and then push the top of the assembly into the cutout until the
plastic clip locks it in place.
9. Turn the handle on the locking ring completely to the right and secure the base to
the wall with a screw.
10. Insert the whipper chamber into the base (making sure to also insert the
chamber's inlet into the adaptor), and turn the handle on the locking ring to the
center position to secure the chamber.
July 15, 2015
Eccellenza Express – Service Manual
53