Features; Stitch Length; Stitch Count; Basic Operation - Brother PD-3000 Instruction Manual

Stitch length

Can be set in the range 0.3 to 12.7 mm

Stitch count

The maximum stitch count per data is 20,000. (The sewing machine can hold 512 patterns and the CF card can hold
900 patterns. The holdable number of patterns created using a large number of stitches per data may be less.)
Do not handle the programmer or connector for the
sewing machine or the AC adapter with wet hands,
otherwise it may cause electric shocks.
Do not insert objects such as screwdrivers into the
AC adapter jack or the CF card slot, otherwise it may
case fire or electric shocks or problems with correct
operation.
Do not use any AC adapter other than the one from
Brother, otherwise it may cause fire or electric
shocks or problems with correct operation.
When using the AC adapter, do not use any voltage
other than the specified voltage, otherwise it may
cause fire or electric shocks or problems with correct
operation.
If a foreign object gets inside the programmer,
immediately disconnect it from the sewing machine
(or disconnect the AC adapter from the wall outlet)
and contact the place of purchase or a qualified
technician. If you continue to use the programmer
while there is a foreign object inside it, may result in
fire or electric shocks or problems with correct
operation.
Do not place the programmer on unstable surfaces
such as unsteady tables or high shelves, otherwise
it may tip over or fall down and cause injury.
Do not place heavy objects on top of the
programmer, otherwise it may become unbalanced
and tip over or fall down and cause injury.
The programmer and the sewing machine should
only be used by operators who have received
proper training.
CHAPTER 2 SETTING UP YOUR PROGRAMMER
F e a t u r e s
F e a t u r e s
B a s i c o p e r a t i o n
B a s i c o p e r a t i o n
WARNING
Disconnect the AC adapter from the wall outlet
before disconnecting the AC adapter plug from the
programmer, otherwise it may cause electric shocks
or problems with correct operation.
Do not damage or process the connection cable for
the sewing machine or the AC adapter cable, or
place heavy objects such as furniture on top of them
or bend or pull them with excessive force, otherwise
it may cause fire or electric shocks or problems with
correct operation.
Do not use the programmer if a problem is noticed
such as smoke or a bad odor coming from the
programmer, otherwise it may cause fire or electric
shocks or problems with correct operation.
I mmediately disconnect the programmer from the
sewing machine ( or disconnect the AC adapter from
the wall outlet) and contact the place of purchase or
a qualified technician.
(The programmer must never be repaired by the
customer, as it can be extremely dangerous to do
so.)
CAUTION
Turn off the power switch before connecting and
disconnecting
machine, otherwise it may damage the programmer
and the control box.
Be sure to disconnect the connector for the sewing
machine when using the AC adapter, otherwise it
may cause problems with correct operation of the
programmer.
When finished with creating programs, disconnect
the connector for the sewing machine and store the
programmer in a safe place.
If the sewing machine is operated while the
programmer is still sitting on the work table, the
programmer may fall down and cause injury, or
damage to the programmer may result.
PD-3000
the connector for the sewing
7