Brother PD-3000 Instruction Manual page 34

CHAPTER 3 PROGRAMMING WITH ICONS
Creating code
Inputting an end code
Checking the program setting and setting attribute
Editing the current
program
26
Setting the thread trimming code
Setting the option output code
Setting the low speed code
Setting the split speed code
Setting the basting code
Setting the height of presser foot
Setting a thread tension
Setting a trigger input
Moving a pattern in parallel by feeding
Moving a pattern in parallel by sewing with the specified pitch
Moving in parallel
Moving a part of the pattern in parallel
Repeated copying a pattern
Copying a pattern symmetrically to the Y-axis
Copying a pattern symmetrically to the X-axis
Copying a pattern symmetrically to a point
Copying in the reverse direction
Deleting a part of the program
Creating a multiple stitch
Creating a stop stitch
PD-3000