Rotating A Pattern Clockwise (Counterclockwise) - Brother PD-3000 Instruction Manual

CHAPTER 4 PROGRAMMING WITH COMMANDS

Rotating a pattern clockwise (counterclockwise)

Commands to be used
This function is available only when the needle point is at the home position.
Values of 1 to 359 degrees are available for input.
1. Make sure that the needle point is at the home
position.
Press if the needle is not at the home position.
2. Determine the center point for rotation with
.
3. Input
136
Rotating clockwise
Rotating counterclockwise
or .
PD-3000
4. Input the angle in 3 digits, and then press .