If Is Selected - Brother PD-3000 Instruction Manual

If is selected
Data chunks separated with feed data are resized and copied.
If the number of feed boundaries to
be ignored is 0:
Only A is copied.
A' becomes a split program.
1. Input a resizing scale in the X and Y directions,
stitch length, and the number of feed boundaries
to ignore.
Resizing scale between 0 and 400% are available.
If the stitch length is 0.0, the pattern is resized with
the same number of stitches as the original data.
Inputting 99 as the number of feed boundaries to
ignore ignores all boundaries.
If the number of feed boundaries to
be ignored is 1:
A and B are copied.
A' and B' become split programs.
2. Press
3. Move the needle point to the reference point of
4. Press
PD-3000
CHAPTER 3 PROGRAMMING WITH ICONS
If the number of feed
boundaries to be ignored is 2:
Data unit A, B and C are copied.
A', B' and C' become split programs.
.
resizing with
When using the home position as the reference point,
there is no need to follow this step.
.
The copied data is added as split data.
.
83