Brother PD-3000 Instruction Manual page 4

Use the programmer and the sewing machine in
an area which is free from sources of strong
electrical noise such as electrical line noise or
static electric noise.
Sources of strong electrical noise may cause
problems with correct operation of the programmer
and the sewing machine.
Any fluctuations in the power supply voltage
should be within ±10% of the rated voltage for the
machine.
Voltage fluctuations which are greater than this
may cause problems with correct operation of the
programmer and the sewing machine.
The power supply capacity should be greater than
the requirements for the equipment's power
consumption.
Insufficient power supply capacity may cause
problems with correct operation of the programmer
and the sewing machine.
Do not place the programmer on unstable
surfaces such as unsteady tables or high
shelves, otherwise it may tip over or fall down
and cause injury.
Do not place heavy objects on top of the
programmer, otherwise
unbalanced and tip over or fall down and
cause injury.
The programmer and the sewing machine
should only be used by operators who have
received proper training.
Be sure to wear protective goggles when using
the sewing machine.
If goggles are not worn, there is the danger
that if a needle breaks, parts of the broken
needle may enter your eyes and injury may
result.
iii
CAUTION
Environmental requirements
Installation
it may become
During use
PD-3000
The ambient temperature should be within the
range of 5 ° C to 35 ° C during use and storage.
Temperatures which are lower or higher than this
may cause problems with correct operation of the
programmer and the sewing machine.
The relative humidity should be within the range of
45% to 85% during use and storage, and no dew
formation should occur in any devices.
Excessively dry or humid environments and dew
formation may cause
operation of the programmer and the sewing
machine.
In the event of an electrical storm, turn off the power
and disconnect the power cord from the wall outlet.
Lightning may cause
operation of the programmer and the sewing
machine.
Turn off the power switch before connecting and
disconnecting the connector
machine, otherwise it may damage the programmer
and the control box.
Be sure to disconnect the connector for the sewing
machine when using the AC adapter, otherwise it
may cause problems with correct operation of the
programmer.
When finished with
disconnect the connector for the sewing
machine and store the programmer in a safe
place.
If the sewing machine is operated while the
programmer is still sitting on the work table,
the programmer may fall down and cause
injury, or damage to the programmer may
result.
If a problem occurs with the operation of the
programmer or the sewing machine , contact the
place of purchase or a qualified technician.
problems with correct
problems with correct
for the sewing
creating programs,