Network Appliance C1200 NetCache Service Manual page 79

Installing a disk
drive
Chapter 6: Maintenance and Servicing
Step Action
2 While grounded, remove the bezel, then press the release button on
the disk drive carrier handle to unlock the drive and swing the drive
carrier handle away from the C2100.
3 Slide the drive completely out of the bay.
4
If you are...
Installing a new or replacement
disk drive
Not installing or replacing a disk
drive
To install a disk drive, complete the following steps.
Step Action
1 Remove the slot cover, if applicable, then align the replacement drive
with the edges of the empty drive bay, then slide the drive all the way
into the bay.
2 Close the drive carrier handle and push until it seats into place. Make
sure that the drive is securely in place by giving it a gentle tug. If the
drive comes out, reseat it and lock it into place, then replace the
bezel.
Result: The system restarts data processing after the disk is locked
in place.
Then...
Go to "Installing a disk
page 69.
Install the slot cover over the
empty slot.
drive" on
69