Network Appliance C1200 NetCache Service Manual page 42

Error message or code
8191 4:1 Core to bus
ratio: processor cache
disabled
8192 L2 cache size
mismatch
8193 CPUID, processor
stepping are different
8194 CPUID, processor
family are different
8195 Front side bus
speed mismatch; system
halted
8196 Processor models
are different
8197 CPU speed
mismatch
8300 Baseboard
management controller
failed to function
8301 Front panel
controller failed to
function
8305 Hot swap controller
failed to function
8420 Intelligent system
monitoring chassis
opened
84F1 Intelligent system
monitoring forced
shutdown
32
Description
The CPU cache was disabled.
The expected and detected L2 cache
do not match.
The expected and detected CPU
speeds are different.
The expected and detected CPU
family are different.
A bus error occurred. The expected
and detected bus speeds are
different.
The expected and detected CPU
models are different.
The expected and detected CPU
speeds are different.
The baseboard management
controller failed.
The front panel controller failed.
The hot swap controller failed—
C2100 only.
N/A
Corrective action
Replace the motherboard, as
described in "Replacing the
motherboard" on page 102. If the
problem persists, call Network
Appliance Customer Support.
Replace the system chassis, as
described in "Replacing the
appliance chassis" on page 106.
Ignore this error message and
continue booting to the operating
system. If the system does not boot,
call Network Appliance Customer
Support.
Startup error messages