Network Appliance C1200 NetCache Service Manual page 67

Status indicator from left LED
to right LED
POST
code Left
57h Off
53h Off
54h Off
60h Off
65h Off
7Fh Grn
80h Red
81h Red
82h Red
83h Red
Chapter 5: Error Messages and Troubleshooting
Right
Amb Grn Amb
Red Amb Amb
Amb Off Red
Red Red Off
Amb Red Grn
Amb Amb Amb
Off Off Off
Off Off Grn
Off Grn Off
Off Grn Grn
Description
Chipset hook after memory size.
Display processor cache size.
Disable parity and NMI reporting.
Test 8237 DMA Controller: The DMA page register test
passed. Performing the DMA Controller 1 base register
test next.
Init 8237 DMA Controller: The DMA controller 2 base
register test passed. Programming DMA controllers 1 and
2 next.
Init 8237 DMA Controller: The DMA controller 2 base
register test passed. Programming DMA controllers 1 and
2 next.
Extended NMI Enable: Extended NMI source enabling is
in progress.
Enable Mouse and Keyboard: The keyboard test started.
Clearing the output buffer and checking for stuck keys.
Issuing the keyboard reset command next.
Keyboard Interface Test: A keyboard reset error or stuck
key was found. Issuing the keyboard controller interface
test command next.
Check Stuck Key Enable Keyboard: The keyboard
controller interface test was completed. Writing the
command byte and initializing the circular buffer next.
Disable Parity NMI: The command byte was written and
global data initialization completed. Checking for a locked
key next.
57