Network Appliance C1200 NetCache Service Manual page 118

108
Step Action
3
If you have a...
C1200 chassis
C2100 chassis
4 Replace the cover on the system, as described in
appliance" on page 66.
5 Install the side brackets in the replacement chassis, then install the
chassis back into the equipment rack, as described in the appropriate
section of "Installing the NetCache
6 Install the disk drives, as described in
drives" on page 67.
7 If needed, update the boot image on the CompactFlash card and
install the NetCache software on the system, as described in
"Updating software and
8 Boot the system and run all the system diagnostics. For more
information, see the Diagnostics Guide on the NOW site at
http://now.netapp.com.
Then...
Skip this step.
Install the power supplies, as
described in
supply in the
page 90.
appliance" on page 7.
"Adding or replacing disk
firmware" on page 98.
Replacing the appliance chassis
"Installing a power
C2100" on
"Closing the