Network Appliance C1200 NetCache Service Manual page 26

Connecting to an
ASCII terminal
console
16
To connect an ASCII terminal console to the appliance, complete the following
steps.
Step Action
1 Set the following communications parameters to the same values for
both the appliance and ASCII terminal.
Parameter
Baud
Data bit
Parity
Stop bits
Flow control
Note
See your terminal documentation for information about changing
your ASCII console terminal settings.
2 Connect the RJ-45 end of the cable to the console port on the
appliance and the DB-9 of the cable to the ASCII terminal.
3 Go to Chapter 4,
Setting
9600
8
None
1
None
"Powering on the NetCache
Connecting to an ASCII terminal console
appliance," on page 17.