Network Appliance C1200 NetCache Service Manual page 46

Boot error message
File system may be
scrambled
Invalid PCI card slot
%d
Configuration
exceeds max PCI
space
36
Explanation
One of the following errors causes the
file system to be inconsistent:
◆
An unclean shutdown when the
appliance is in degraded mode
and when NVRAM is not
working.
◆
The number of disks detected in
the disk array is different from the
number of disks recorded in the
disk labels. The system cannot
start when more than one disk is
missing.
◆
The system encounters a read
error while reconstructing parity.
◆
A disk failed at the same time the
system crashed.
%d—The expansion slot number. The
system detects a adapter that is not
supported by Network Appliance.
The memory space for mapping PCI
adapters was exhausted, because
either
◆
There are too many PCI adapters
in the system
◆
An adapter is demanding too
many resources
Corrective action
Contact Network Appliance Customer
Support to learn how to start the
system from a system boot diskette
and repair the file system.
Make sure that all disks on the system
are properly installed.
Contact Network Appliance Customer
Support for help.
Contact Network Appliance Customer
Support to learn how to repair the file
system.
Replace the unsupported adapter with
an adapter that is included in the
System Configuration Guide at
http://now.netapp.com.
Verify that all expansion adapters in
the appliance are supported.
Contact Network Appliance Customer
Support for help. Have a list ready of
all expansion adapters installed in the
appliance.
Startup error messages