Error message
"Power Unit:
<event>"
"Power Unit
Redundancy: <event>"
POST error: POST
error message or
number
Critical Interrupt:
<event>
Memory: <event>
SCSI Voltage
Performance: <event>
Chapter 5: Error Messages and Troubleshooting
Explanation
One of the following events was
detected at the power unit sensor:
◆
Power off
◆
Power cycle
◆
AC lost
◆
AC lost deasserted (restored)
One of the following events was
detected at the power unit redundancy
sensor:
◆
Redundancy lost
◆
Redundancy regained
A POST error was detected at the
POST error sensor.
A bus error was detected at the
critical interrupt sensor.
One of the following events was
detected at the memory sensor:
◆
Correctable ECC
◆
Uncorrectable ECC
One of the following events was
detected at the SCSI voltage
performance sensor:
◆
Performance lags
◆
Performance met
Corrective action
Check the power and correct any
conditions or replace the power
supply, as described in
power
supplies" on page 89.
See
"Startup error
messages" on
page 24 for information about the
displayed error.
Report the problem to Network
Appliance Customer Support.
Report the problem to Network
Appliance Customer Support.
No action needed.
"Replacing the
43