Network Appliance C1200 NetCache Service Manual page 54

Error message
Processor %n Stat:
<event>
DIMM %n: <event>
Sensor failure: <event>
44
Explanation
One of the following events was
detected at the processor sensor:
◆
Absence
◆
Thermal trip
◆
IERR
◆
FRB1
◆
FRB2
◆
FRB3
◆
Disabled
One of the following events was
detected at the DIMMn (n = 1-6)
sensor:
◆
Fault status
◆
Installed
◆
Disabled
One of the following events was
detected at the sensor failure sensor:
◆
I2C device not found
◆
I2C error
◆
I2C bus timeout
Corrective action
No action needed.
Replace the identified DIMM, if
faulty, as described in
DIMMs in the appliance" on page 92.
Replace the motherboard, as
described in "Replacing the
motherboard" on page 102.
Operational error messages
"Replacing the