Network Appliance C1200 NetCache Service Manual page 41

Error message or code
8100 Processor 1 failed
BIST
8110Processor 1 internal
error (IERR)
8120 Processor 1
thermal trip error
8130 Processor 1
disabled
8140 Processor 1 failed
FRB-3 timer
8150 Processor 1 failed
initialization on last boot
8160 Processor 01:
unable to apply BIOS
update
8170 Processor P1 :L2
cache failed
8180 Bios does not
support current stepping
for processor P1
8190 Watchdog timer
failed on last boot
Chapter 5: Error Messages and Troubleshooting
Description
The CPU failed the built-in self test.
The CPU encountered an internal
error.
The CPU thermal sensor detected a
high temperature on the CPU.
The CPU is disabled or not
functioning.
The CPU failed the FRB-3 timer
test.
The CPU did not initialize properly.
The CPU cannot apply a recent
BIOS update.
The L2 cache on the CPU failed.
The BIOS and CPU versions are out
of synch.
The watchdog timer failed on the last
boot.
Corrective action
Replace the motherboard, as
described in "Replacing the
motherboard" on page 102. If the
problem persists, call Network
Appliance Customer Support.
Replace the motherboard, as
described in "Replacing the
motherboard" on page 102. If the
problem persists, call Network
Appliance Customer Support.
Ignore this error message and
continue booting to the operating
system. If the system does not boot,
call Network Appliance Customer
Support.
31