Telephone Blocking; Handset Telephone Lock - Unify OpenStage M3 Operating Instructions Manual

Telephone blocking

u v
Ï
Settings
s t
System
s t
Handset PIN
o [
o [
Telephone blocking

Handset telephone lock

Can only be set if this menu item is visible. To set, see
You can protect your handset against theft by entering a 4-digit numerical code
(PIN) to lock it.
The PIN is preset to "0000" (default). The handset does not prompt for a PIN in
this setting. As soon as you have changed the PIN you will need to enter it when
you turn on the handset. You can protect your handset from unauthorised ac-
cess with the telephone lock
Enter the value "0000" again to deactivate the PIN.
If you have forgotten your PIN, please contact Unify Service. It will be re-
set at your own expense. The handset is returned to the default state (see
Page 87).

Attention:
The registration and phonebook are also lost however in the process! The
delivery status is restored.
Entering a new PIN
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
Enter and confirm the old PIN. If a PIN has not yet been set, then enter "0000".
Enter and confirm the new PIN.
a
Press the On-hook key to end the operation.
Battery charging when PIN lock active
If the handset deactivates because the battery is flat, it automatically reactivates
as soon as you place it in the charging shell. The charging operation starts. If
you have already set a PIN, you must enter it so that the handset can receive
calls.
Page 90.

89
Page 86.
