Conducting Calls - With Multiple Users; Call Waiting - Unify OpenStage M3 Operating Instructions Manual

54
> <
CAMP-ON
PICKUP
Conducting calls – with multiple users

Call waiting

You need to speak to a user in your communications system urgently, even
though his line is busy. You can send a call waiting signal during his call to let
him know you want to talk to him. The user either answers immediately or you
will be automatically connected to him when he has finished his call.
This function is only available if it has been configured by the service engineer.
The user is busy. You want to use call waiting.
[
Select the menu item, confirm and wait briefly.
To camp on, you must have the appropriate class of service.
Camp-on is not possible if the called party is protected by the camp-on se-
curity function.
You receive a call waiting signal (second call)
You are still available to other callers, even though you are on the telephone.
The call waiting signal informs you of the second call while you are conducting
a call. You can answer this call without ending the first call.
p
You are on a call and hear a call waiting signal.
If you want to answer the second call, you can either place the first call on hold
(the first caller waits) or end the first call.
Placing the first call on hold and answering the second call
Answer the second call.
Talk to the second caller. The first caller waits. His call is on hold. You can now:
• toggle between the two callers
• set up a conference
Ending the second call
a
Press the On-hook key. Your handset rings.
c
Press the Talk key to talk to the first caller again.
Ending the first call
a
Press the On-hook key. The first call is ended. Your telephone rings.
c
Press the Talk key and answer the second call.
Ending both calls
a
Press the On-hook key. Your handset rings.
c
Press the Talk key to talk to the other caller again.
a
Press the On-hook key. Both calls are ended.
Conducting calls – with multiple users
Page 56 or

Page 57.
