Answering Or Rejecting A Call - Unify OpenStage M3 Operating Instructions Manual

26
> <
TO WAIT. CALL
> <
RETURN
> <
TO WAIT. CALL
c or d
TURN RING OFF
c or d
Ending a consultation call and returning to the waiting call
Either:
[
If the consultation call/enquiry function was activated but a number was not yet
entered: Select the menu item and confirm.
[
Select the menu item and confirm.
You will be connected to the first party again. The second partner hears the busy
tone and hangs up; an OpenStage handset hangs up automatically.
The second user hangs up. By pressing "TO WAIT. CALL ", you are reconnected
Or
[
with the first party again.
However, you can also
• toggle between the partners
• set up a conference
• transfer the waiting partner to the second partner

Answering or rejecting a call

Accepting a call
Your handset rings
The name and/or telephone number of the caller can be displayed. You have the
following options for answering a call:
k
The handset is in the charging shell: Remove the handset from the charging
shell (only works if "Auto Answer" is active)
The handset is not in the charging shell. Press the Talk key or Speakerphone
key.
When you have accepted the call you can:
• transfer the call
• place the call on hold and consult with someone else in the room
• place the call on hold and call a second partner
Page 55 or toggle the call

Deactivating the ringer for the current call:
If you are currently in a meeting, for example, and want to leave the room before
accepting the call:
[
Confirm the display message. The ringer is deactivated for the current call.
Press the Talk key or Speakerphone key. The call is accepted.
Conducting calls – the basic functions
Page 56,

Page 57 or

Page 82. The caller information appears on the display.

Page 55,

Page 56 or to set up a conference

Page 55.

Page 82.

Page 25 in order to forward

Page 54,

Page 57.
